Specifications	Ellis 9400 Drill Press	Ellis 9500 Drill Press	Ellis 12000 Drill Press
Motor	2 HP A.C. single phase-choose 110/220	2 HP D.C. plug in 220 single phase or 1 1/2 HP A.C. single phase-choose 110/220	2 HP D.C. plug in 220 single phase
Control box	Infinitely variable speed with a turn of the dial Instantaneous electronic reversing Full torque at low speeds All solid state circuitry Continuous speed adjustment while in operation	Infinitely variable speed with a turn of the dial Continuous speed adjustment while in operation Instantaneous electronic reversing Full torque at low speeds All solid state circuitry	Infinitely variable speed with a turn of the dial Continuous speed adjustment while in operation 220 volt A.C. single phase input Instantaneous electronic reversing Full torque at low speeds All solid state circuitry
Spindle speeds	0 – 1200 RPM	0 – 1200 RPM	0 – 1800 RPM
Drills to center	18 1/8”	20”	16”
Drilling capacity	steel 1 1/16” cast iron 1 1/4”	steel 1 1/16” cast iron 1 1/4”	steel 1 1/16” cast iron 1 1/4”
Tapping capacity	3/4”	3/4”	3/4”
Morse taper	No. 3	No. 3	No. 3
Quill diameter	3”	2 1/8”	3”
Column diameter	4”	4”	4 1/2”
Spindle travel	5 3/8”	5 1/8”	5”
Spindle to table (max.)	27 1/4”	26 1/2”	23 1/2”
Spindle to base	46 1/4”	48 1/8”	46”
Shipping weight	675 lbs	500 lbs	750 lbs
Table	production type: t- slotted 15 7/8” X 17 7/8” 2 Slots for 1/2” t-bolts ground working surface coolant trough	production type: t- slotted 16 5/8” X 18 5/8” 2 slots for 1/2” t-bolts ground working surface coolant trough	production type: t- slotted 19” x 21 1/4” 2 slots for 1/2” t-bolts ground working surface coolant trough
Base	t- slotted 16 3/8” x 26 5/8” 2 slots for 1/2” t-bolts ground working surface	t- slotted 18” X 25 1/2” 2 slots for 1/2” t-bolts ground working surface	t- slotted 18 1/2” x 26” 2 slots for 1/2” t-bolts ground working surface
Size	height 69 1/2” width 20” depth 29”	height 70 1/2” width 20” depth 34 1/4”	height 71” width 28 3/8” depth 32 3/8”
Options	ball bearing chuck 4-1/4"drill press vise 13" drill press vice power down feed	ball bearing chuck 4-1/4"drill press vise 13" drill press vice	ball bearing chuck 4-1/4"drill press vise 13" drill press vice power down feed milling table