Design Details for Belltech Suspension
| (A) Not designed for diesel applications. | (V) Sway Bars only fit vehicles equipped with O.E. rear sway bar mounts. |
| (B) Spindle will not work with stock Impala SS wheels. |
(W) C-1500 1/2 Ton Suburban use #6700 Shackle to obtain 4" drop. |
| (C) 88-91 must use Alignment Kit #4950. | (X) 95-98 Astro Vans may also use #5958 leaf spring for 3" drop. |
| (D) Must use Pinion Shim Kit #4975. | (Z) Must use #6431 C-Section Frame Rail Kit w/ Hanger kit. |
| (E) For increased suspension travel use #6911 C-Section Frame Kit. |
(AA) For trucks w/o O.E. front sway bar w/Hanger kit. |
| (F) On years 81-87, If brake rotor measures 1" thick use Spindle #3200 if 1.25" use #3100. |
(AB) For trucks w/o O.E. front sway bar order adapter kit p/n 5700. |
| (G) Fits 3" (most common) axle housings only. | (AC) For trucks w/o O.E. front sway bar order adapter kit p/n 5708. |
| (H) Spindle will not work with factory 1LE (Handling Package Option). |
(AD) For trucks w/o O.E. rear sway bar order adapter kit p/n 5712. |
| (I) Spindle will not work with GT style factory wheels. |
(AE) Tahoe flip kits require an experienced installer. Please call for information before you attempt installation. |
| (J) Dropped I-Beam construction. | (AF) When using a flip kit on a sway bar equipped Astro Van it is necessary to change the swaybar to Belltech No 5528. |
| (K) 88-89 rear axle saddle must be welded inplace. |
(AG) Use flip kit number 6612 for 99-00 trucks with 5" frame height measured at the rear bump stop. |
| (L) All except “All Wheel Drive.” | (AH) Use flip kit number 6614 for 99-00 trucks with 5" frame height measured at the rear bump stop. |
| (M) Spindle will not work with 14" wheels. | (AI) Use of leaf springs may affect towing capacity. |
| (N) Shock does not fit 82-86+. | (AJ) Use p/n 4952 for front end alignments. |
| (O) Lightnings must change tire size when using I-Beams. |
(AK) Min. wheel size 16". |
| (P) Rear leaf springs require 2" re-arch for adequate clearance. |
(AL) Use p/n 4954 for front end alignments. |
| (Q) For Extended Cab applications use Lowering Blocks #6202 (3"drop with 2‡taper) or #6102 (2" block with 2‡ taper). |
(AM) Nitro-Active shock recommended. |
| (R) For use with automatic transmission only. | (AN) When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke. |
| (S) It is highly recommended to use an AirJack | (AO) Will not fit vehicle with 5.4L engine. |
| (T) Do not lower front of vehicle more than 3" | (AP) Trucks with "Factory Lowered" Suspensions may not achieve the specified drop. |
| (U) 4" Ext. Cab must use #4981. 6" Ext. Cab must use #4985 driveline alignment kit. |
TBA To be announced. |